Badger

Badger 2020-2F 2020 Sotar airbrush ( size #1 ) - large version

2020 Sotar airbrush ( size #1 ) - large version - Image 1
Proizvođač: Badger
Šifra proizvoda: BAD2020-2F
Trenutna dostupnost: dostupan!
€183.50 ili 117100 bod.

Uključen 25% PDV
za isporuku u zemlji: Hrvatska
Da biste promijenili zemlju, kliknite ovdje

Osnovne informacije

ProizvođačBadger
Šifra proizvoda:BAD2020-2F
Težina0.25 kg
Ean:047459202029
Dodano je u katalog:20.8.2007
TagoviAerografy Badger-2020

Set contains: 2020 Sotar airbrush ( size #1 ) - large version, extra needle, trigger pad, finger rest, guarded regulator, wrench, mini screw driver and instruction manual in a corrugated display box.

A model airbrush double action airbrush from Badger, USA, which is offered with a 0.2mm nozzle. The airbrush has an integral (non-replaceable) reservoir with a volume of 1/12 oz, or approximately 2.5 ml. The manufacturer recommends filling it with paint to about 2/3 of its volume. It is worth adding that it has been fitted with a lid to prevent accidental paint splashing. On the other hand, it is positioned above the tool's body, which means that the paint is fed by gravity while working. On the other hand, the mixing of paint and air takes place before the head is lowered (so-called internal mixing). Like other dual-function airbrush sprayers, this tool allows simultaneous control of both the air flow rate and the amount of injected paint with corresponding movements of the trigger lever, which, among other things, makes it possible to achieve a smooth colour transition. The airbrush in question also has a mechanism for adjusting the maximum so-called 'stroke' of the firing pin located at the rear. It should also be noted that the body of the tool has been slightly lengthened by the manufacturer (if only in relation to the 105 Patriot series), which makes it fit even better in the hand, and its balance is very good. It is also very easy to remove and reinstall the trigger mechanism, thanks to the manufacturer's "Track and Winged" system. In addition, the mechanism itself is rather sensitive and susceptible to even slight movements of the finger, and its finial has been shaped to increase comfort. Another noteworthy feature is Badger's patented mounting of the firing pin in the tool's body, which allows very rapid removal and subsequent mounting (Easy Access). Also worthy of note is the fact that the manufacturer uses high-quality Teflon (PTFE) gaskets, which have an excellent service life and, above all, are not very susceptible to the effects of modelling chemicals. Nevertheless, it is recommended that it be used with paints of low density and viscosity, and thus proper attention should be paid to their proper dilution before use. On the other hand, due to the size of the nozzle (0.2 mm), the presented airbrush will prove useful above all for those airbrushing jobs that require a high degree of precision. Examples include the shading technique or the camouflage painting of multi-coloured aircraft or combat vehicles. With the right skills, it can be successfully used when painting 1:72 scale models and 1:35 scale or 54 mm (and larger!) figures. It can also be used when working with all types of dioramas or vignettes. The presented airbrush is undoubtedly a very good quality modelling tool, which, with proper use and maintenance, can serve for many years in the workshop of many modellers, especially intermediate or very advanced ones. It should be noted that the presented airbrush is offered only with a 0.2 mm nozzle, a needle dedicated to it, an integral paint container with a lid, an adapter and 2 Allen keys. The whole is housed in a handy carrying case for easy storage and possible transport. Finally, it is worth noting that it is recommended to use this airbrush at a compressed air pressure of approx. 1.05 to approx. 3.45 bar (15-50 PSI), while the optimum pressure is approx. 2.1 bar (30 PSI). Related products to the airbrush in question include: Sotar 20/20 SLIM 0.2mm, Mr. Procon Boy FWA Platinum (0.2 mm) or Aerograf Evolution CR+ 0.2.

The Model 2020, Sotar is a dual action, internal mix, gravity feed airbrush. The 2020 provides the professional illustrator with an airbrush capable of producing the ultimate in fine detail. It is more precise, more comfortable, and more reliable than any competitor. When fine line detail or the finest paint atomization for a "soft" spray pattern is required, SOTAR is the only choice. Finely pigmented properly reduced paints, watercolors, inks, dyes, and low viscosity acrylics can be sprayed with the 2020. The elongated body maintains an efficient distance between trigger and paint reservoir. The trigger and back lever assemble easily thanks to our innovative "track and winged" design.

Greška u opisu? Prijavi problem
Ocjene naših kupaca
Dodajte vašu ocjenu o: 2020 Sotar airbrush ( size #1 ) - large version
...
Dodano je u katalog: 20.8.2007
Trenutna dostupnost: dostupan!
  • proizvod je dostupan
  • proizvod nije dostupan
  • proizvod je dostupan po narudžbi
  • dostava robe
  • nema
  • 1 komad
  • 2 komada
  • 3-5 komada
  • 6-10 komada
  • više od 10 komada
Možemo li nabaviti proizvod koji nije dostupan ili kojeg nema na stranici?
Mogući dodaci

Skala: 2020
Proizvođač: Badger
Šifra proizvoda: BAD20-105
Dostupnost: dostupan!

€11.93 ili 7600 bod.

Skala: 2020
Proizvođač: Badger
Šifra proizvoda: BAD20-126
Dostupnost: dostupan!

€17.72 ili 11300 bod.

Skala: 2020
Proizvođač: Badger
Šifra proizvoda: BAD20-108
Dostupnost: dostupan!

€10.26 ili 6500 bod.

Skala: 2020
Proizvođač: Badger
Šifra proizvoda: BAD20-125
Dostupnost: dostupan!

€17.17 ili 11000 bod.

Skala: 2020
Proizvođač: Badger
Šifra proizvoda: BAD20-103
Dostupnost: dostupan!

€13.60 ili 8700 bod.

Proizvođač: Fine Art
Šifra proizvoda: FNR612
Dostupnost: dostupan!

€2.19 ili 1400 bod.

Proizvođač: Tamiya
Šifra proizvoda: tam74550
Dostupnost: dostupan!

€7.31 ili 4400 bod.

Proizvođač: Tamiya
Šifra proizvoda: tam74551
Dostupnost: dostupan!

€6.25 ili 3800 bod.

Proizvođač: Mr.Hobby
Šifra proizvoda: GUN-PS-288
Dostupnost: dostupan!

€63.63 ili 40600 bod.

Proizvođač: Tamiya
Šifra proizvoda: tam74539
Dostupnost: dostupan!

€21.51 ili 13100 bod.

Proizvođač: Adler
Šifra proizvoda: ADL-AD-7620
Dostupnost: dostupan!

€5.59 ili 3600 bod.

Slični proizvodi

Proizvođač: Badger
Šifra proizvoda: BAD150-1
Dostupnost: dostupan!

€210.38 ili 134200 bod.

Proizvođač: Badger
Šifra proizvoda: BAD100-5
Dostupnost: dostupan!

€224.92 ili 143500 bod.

Proizvođač: Badger
Šifra proizvoda: BAD2020-VM
Dostupnost: dostupan!

€172.25 ili 109900 bod.

Proizvođač: Badger
Šifra proizvoda: BAD155CS
Dostupnost: dostupan!

€144.82 ili 92400 bod.

Proizvođač: Badger
Šifra proizvoda: BAD360-CS
Dostupnost: dostupan!

€164.02 ili 104600 bod.

Proizvođač: Badger
Šifra proizvoda: BAD108-XSW
Dostupnost: dostupan!

€162.38 ili 103600 bod.

Proizvođač: Badger
Šifra proizvoda: BAD150-2
Dostupnost: 2-6 tjedana

€210.38 ili 134200 bod.

Proizvođač: Badger
Šifra proizvoda: BAD100-8
Dostupnost: 2-6 tjedana

€130.56 ili 83300 bod.

Proizvođač: Badger
Šifra proizvoda: BAD250-2
Dostupnost: 2-6 tjedana

€33.46 ili 21300 bod.

Proizvođač: Badger
Šifra proizvoda: BAD105CS
Dostupnost: po narudžbi

€135.50 ili 86400 bod.

Proizvođač: Badger
Šifra proizvoda: BAD155-CS
Dostupnost: po narudžbi

€144.82 ili 92400 bod.

Proizvođač: Badger
Šifra proizvoda: BAD1RV
Dostupnost: po narudžbi

€181.85 ili 116000 bod.